SBIR/STTR Award attributes
Integration of RF ferrites on printed circuit boards (PCBs) is highly desired for realizing compact, lightweight and low-cost systems with different RF ferrite components, including inductors, antennas and antenna arrays, etc. However, it has been challenging to integrate ferrites on PCBs. Spin spray deposition can produce fully dense, high crystalline quality, and low-loss RF ferrites at a low temperature at a low cost. However, spin spray technique and facilities are not commercially available. Two major challenges severely limit ferrite integration on PCBs by spin spray deposition: (1) limited ferrite film thickness of 5~10 µm, low loss tangent 1GHz on PCBs, thus enabling low-temperature ferrite deposition large scale (36”×48”) PCB panels. At the same time, new compact integrated RF ferrite devices, including antennas and inductors have been demonstrated on ferrite coated PCBs. The project team is well positioned for the Phase II efforts.
