Patent attributes
Microfabricated tools useful for manipulating small, delicate samples are formed from thin plastic films. The films have a small thickness (preferably 5 to 50 micrometers and typically 10 micrometers) and small lateral dimensions (preferably 2 mm or less and typically 0.1 to 1 mm) so that they are reasonably flexible, but are preferably curved by being wrapped around a cylindrical or flat post to give them some rigidity. The softness and thinness of the plastic reduce risk of sample damage during incidental contact with the tool. Its thinness makes it optically and X-ray transparent, so that the samples can be clearly visualized during manipulations and so that the tools can be used to collect X-ray data from samples. As an option, an X-ray sensitive phosphor is incorporated in the film at low concentration. This allows the X-ray beam to be visually located on the mount or tool. The plastic can also be treated to obtain a desired hydrophobicity or hydrophilicity, mechanically embossed or abraded, or coated with films (for example, of polyethylene glycol via pegylation procedures or of PDMS) that promote or inhibit sample adhesion.
