Patent attributes
In some PCB connector embodiments the internal pins of the probe or wire terminal end could be set at between about 0.4 mm to about 2.0 mm provided that the contact point between the male probe end and the mating female connector is about 1.0 mm. Such embodiments would adjust for alternate connector configurations for connectors while maintaining the required HDMI specifications for the contact point. In other embodiments intermediate distances could be used of about 0.4 mm to about 0.5 mm; about 0.5 mm to about 0.6 mm; about 0.6 mm to about 0.7 mm; about 0.7 mm to about 0.8 mm; about 0.8 mm to about 0.9 mm; about 0.9 mm to about 1.0 mm; about 1.0 to about 1.1 mm; about 1.1 to about 1.2 mm; about 1.2 mm to about 1.3 mm; about 1.3 mm to about 1.4 mm; about 1.4 mm to about 1.5 mm; about 1.5 mm to 1.6 mm; about 1.6 mm to 1.7 mm; about 1.7 mm to 1.8 mm; about 1.8 mm to 19 mm and about 1.9 mm to 2.0 mm once again provided that the probe pins are finally configured to meet the about 1.0 mm requirement for the contact point.
