SBIR/STTR Award attributes
Statement of the problem or situation that is being addressed throughout Phase I portion of your proposal. Describe the problem or situation being addressed. (Typically one to three sentences). While technologies to control the emissions from stationary sources are available, the CO2 removal from small generators and transportation systems (e.g., ships, airplanes) at the source is not practical, making Direct Air Capture (DAC) the only option to control the CO2 concentration in the atmosphere. However, the Direct CO2 capture from air is highly challenging due to the very low concentration of CO2 in the air (less than 0.5 mbar). Because of this very low driving force, the recovery of CO2 from air requires a much larger energy input compared to the systems used in post-combustion capture. Integrating the DAC system with processes that generates low grade heat may reduce the cost of capture. General statement of how this problem is being addressed. This is the overall objective of the Phase I project. How is this problem being addressed? What is the overall project approach? (Ideally, two to four sentences). TDA Research Inc. proposes to develop a new sorbent-based DAC system utilizing the waste heat from a commercial operation to drive the carbon capture process. The small temperature differential needed to operate the temperature swing adsorption (TSA) cycle (~50-60oC) which will remove CO2 at ~500 ppmv and concentrate it to a high pressure, pure gas at 1 atm. What is to be done in Phase I? (Typically three to four sentences). In Phase I, we will optimize the operation of the new sorbent to best match the operation of the geothermal energy generation cycle. In bench-scale proof-of-concept tests, we will demonstrate the sorbent capabilities (i.e., CO2 uptake, energy requirement for the regeneration) and assess the sorbent life (both chemical and mechanical stability over many cycles). In a detailed process design and simulation, we will carry out the integration of the DAC process to the geothermal power plant. We will estimate the carbon capture cost following DOE/NETL process design and analysis guidelines. Commercial Applications and Other Benefits (limited to the space provided). Summarize the future applications or public benefits if the project is carried over into Phase III and beyond. The new technology will reduce the cost of CO2 capture form dilute sources (including air) at low cost. Hence, it will find immediate use various carbon capture applications.
