Company attributes
Other attributes
Factory main building
About the plant
KETZ: history and modernity
Kazan Electrotechnical Plant (KETZ) in 2012 celebrated a significant date - the 70th anniversary of its foundation.
The plant was created on the basis of the branch of plant No. 379 of the People's Commissariat of the Aviation Industry of the USSR, evacuated in 1941 from Leningrad. Already in September 1941. in Kazan, mechanical, tool, repair, assembly shops began to work, and the first sets of the PUAZO-3 product were produced.
In March 1942 By the Decree of the Council of People's Commissars of the USSR and the State Defense Committee, the branch of the Leningrad Plant No. 379 in Kazan was transformed into an independent enterprise.
After being transferred in 1943 to the People's Commissariat of the shipbuilding industry, by decision of the Soviet government, the team was instructed to master the production of new automation devices for ships of the Navy. In the shortest possible time, the design bureau developed and manufactured products "KLN", "RA-52", "KV" and others, new technological production methods were widely introduced.
After the end of the Great Patriotic War, the transition to a peaceful track was not easy. The team of the enterprise was faced with the task of manufacturing products necessary to restore the economy destroyed by the war and meet the needs of the country's population. This required the restructuring of the work of all departments, the creation of new industries. And equipment for the navy and merchant fleets was still being produced: echo sounders, the Normal product, portable beacon lights and the Elba electric flashing device. Since 1950, the enterprise has been actively developing: new production buildings, residential buildings for employees are being built, the production of new special equipment and consumer goods is being mastered - Rondo electrophones, Sonnet stereo systems. The volume of production increased by 2.7 times, labor productivity increased by 110%, 17 new products were mastered.
Recognition of the achievements of the plant staff, its contribution to the development of the country's industry was the award in 1971. Order of the Red Banner of Labor. In 1978, on the basis of the Kazan Electrotechnical Plant, the Tatar Production Association "Sviyaga" was formed.
The difficult period of perestroika and the collapse of the USSR almost ended tragically for the enterprise. However, with the support of the Government of Tatarstan in 2002, the enterprise avoided bankruptcy and received a new opportunity for dynamic development. In 2004, as a result of the privatization of the State Unitary Enterprise of the Republic of Tatarstan "Kazan Electrotechnical Plant", which was the successor of the State Unitary Enterprise "Tatar Production Association. "Sviyaga" the Open Joint Stock Company "Kazan Electrotechnical Plant" was created.
Today JSC "KETZ" is the main Russian manufacturer of ship and ground radio-electronic equipment of the state identification system for the needs of the Ministry of Defense of the Russian Federation, shipyards of the country and for export. 80% of production is made up of special-purpose products - state identification equipment for sea and land-based. In 2012, ground-based equipment was mastered: a high-power interrogator - 77E6 developed by NPO Radioelectronics for the S-400 missile system, and export version interrogators - 44D1.2, 44D-3 for the Antey-2000 and BUK missile systems ".
The civilian direction is 20% of the total production. According to the terms of reference of the Federal Security Service and the Ministry of Internal Affairs of the Republic of Tatarstan, in partnership with Novosibirsk scientists, a multi-zone stationary metal detector "Dozor" has been developed and is being mass-produced, which is now being delivered to the facilities of the World Summer Student Games - Universiade - 2013 in Kazan. Currently, a model range of metal detectors has been developed to ensure security in places with a large flow of people and at facilities with access control: 12-zone stationary Dozor in an anti-vandal case, 21-zone intelligent Dozor-Ts mobile collapsible "Caucasus" for work in open areas.
At the beginning of 2011, the equipment of the printed circuit board production shop was modernized. A set of modern imported equipment was supplied to the enterprise, which meets international standards for the production of modern one- and two-sided printed circuit boards of the 4th accuracy class. The effectiveness of all materials and technologies used has been verified by many years of experience in production.
In addition, the company is engaged in complex solutions in the field of energy and energy saving and provides a full range of services for the implementation of energy solutions. The main areas of production: low-voltage switchboard equipment, medium voltage equipment, design work and engineering, warranty and post-warranty maintenance of equipment. As part of the diversification of production, the plant mastered the production of Riteks oil well control stations for OAO Tatneft and Rosneft, non-standard high-voltage equipment for the benefit of OAO Kazan Helicopter Plant and OAO Nizhnekamskneftekhim.
The assembly quality and reliability of our equipment allows us to successfully compete in the market of the Republic of Tatarstan, as well as beyond its borders. All products are issued with certificates of compliance with the norms of the State Standard in force on the territory of the Russian Federation, and a guarantee from the manufacturer is provided.
Since 2009, under the patronage of the Ministry of Industry and Trade of the Republic of Tatarstan, the company has introduced the Lean Production system. Based on the experience of OJSC KAMAZ and OJSC KVZ, as well as a number of German firms, adjustments were made to the organization of production at our enterprise.
The successful development of the enterprise is conditioned by the support of the Government of the Republic of Tatarstan, partnership with the State Corporation "Russian Technologies" within the framework of the "Program for Development, Modernization and Technical Re-equipment of the Plant until 2015", reduction of production costs, improvement of the quality of products and an active personnel policy.
Characteristics of the production of the Kazan Electrotechnical Plant
metalworking - carries out the manufacture of products by cutting on turning and milling machines. grinding method.
stamping-frame - manufactures metal products by cold stamping and drawing on mechanical and hydraulic presses, by plasma cutting of sheet metal, manufacturing fasteners on heading machines, manufacturing frame products (cabinets, tables, boxes, etc.) using contact welding.
foundry - manufactures products of their aluminum alloys by injection molding. Equipment - injection molding machine M-300 with a maximum locking force of 300 tf.
plastics processing - manufactures products from thermoplastic pastes and polyethylene by casting and manufactures products from thermoplastics and rubber by pressing.
galvanic and paint-and-lacquer - allows you to produce all types of galvanic coatings on ferrous and non-ferrous metals, as well as apply paint and varnish coatings to products, including powder paints.
production of printed circuit boards - allows the production of printed circuit boards on foil-coated fiberglass with a foil thickness of 0.035 mm. The maximum size is 500x300 mm. minimum 5x10 mm. The manufacturing method is combined positive with the use of dry film photoresist of water-alkaline manifestation. The minimum width of the conductors is 0.2 mm, the width of the gaps between the conductors is 0.2 mm, the ratio of the hole diameter and the thickness of the base is at least 0.5.
woodworking - allows for high-quality processing, processing of wood and the manufacture of various panel, panel products (doors, frames, etc.). Equipped with all types of woodworking equipment, both domestic and imported.
assembly and assembly - this is the assembly of devices and products, the installation of printed circuit boards and products, the manufacture of winding products: transformers, chokes, coils, etc.
instrumental - allows you to produce high-quality complex equipment: stamps, molds, injection molds, tools.
Equipped with all kinds of equipment, incl. erosive.
